Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 27 results ...
Ahmad, A G B (1994) Conservation of British colonial buildings built between 1800 and 1930 in Malaysia, Unpublished PhD Thesis, , University of Sheffield.
Ahmed, A L (2019) Development of conceptual constructs for organisational BIM adoption and their systematic application within the UK architecture sector, Unpublished PhD Thesis, School of Architecture, University of Sheffield.
Al-Sedairy, S (1984) Large scale projects: management, design and execution, Unpublished PhD Thesis, School of Architecture, University of Sheffield.
Al-Wareh, M (1979) Investigation of the design procedures for buildings of quality in modern architecture, with notes on the relevant contemporary situation in Syria, Unpublished PhD Thesis, , University of Sheffield.
Andrade de Alencar Loiola, F (2014) The formulation of Public-Private Partnership projects for infrastructure development in Brazil: an institutional analysis of the Municipality of Fortaleza, Unpublished PhD Thesis, , University of Sheffield.
Belhadj, T A (1989) Computer-aided architectural evaluation and design: a cost modelling experiment, Unpublished PhD Thesis, School of Architecture, University of Sheffield.
Brocklesby, M (1999) The environmental impact of frame materials: an assessment of the embodied impacts for building frames in the UK construction industry, Unpublished PhD Thesis, Department of Civil and Structural Engineering, University of Sheffield.
Buckman, A H (2016) An exploration of the applications of increased information availability in smart buildings, Unpublished PhD Thesis, , University of Sheffield.
Butchers, A M (2004) Learning off the job: engineers and professional education, Unpublished PhD Thesis, , University of Sheffield.
Densley Tingley, D (2013) Design for deconstruction: an appraisal, Unpublished PhD Thesis, , University of Sheffield.
- Type: Thesis
- Keywords: environmental assessment; environmental impact; feasibility studies; new build; reuse; timber; designer; sustainability; case studies
- ISBN/ISSN:
- URL: http://etheses.whiterose.ac.uk/3771/
- Abstract:
This thesis contains an assessment and discussion of the sustainability of design for deconstruction. As a basis for the work, existing literature was reviewed and the gaps in existing knowledge highlighted. Environmental assessment methods were identified as a way to incentivise design for deconstruction. An analysis of LEED demonstrated minimal achievement of reuse credits, likely due to limited availability of reused materials. The supply chain can be developed in the future through the design for deconstruction of all new buildings. Quantifying the environmental benefits of design for deconstruction was underlined as a key strategy to encourage designers to consider the incorporation of design for deconstruction. A methodology was developed to account for designed-in future reuse at the initial design stage. This is based on a PAS2050 methodology (2008) which shares the environmental impact of an element over the number of predicted lives. In the course of this work it has been assumed that the typical building has a fifty year life span, a conservative estimate. Studies in this thesis limit analysis to a hundred year period, giving a possible two lives for the majority of elements. The methodology was used as a basis for the calculation of savings that occur by designing for deconstruction. Initial feasibility studies estimated that a 49% saving in embodied carbon is accomplished by designing for deconstruction. Having demonstrated the potential scope of savings, a tool, Sakura, was developed to enable designers to investigate the savings in embodied energy and carbon for their own schemes. Sakura was used to assess the savings that could be achieved for a range of case studies. Steel and timber frame structures demonstrated the greatest potential savings from design for deconstruction. School projects exhibited the highest savings when the building types were compared.
Donohoe, S W (2008) Can surveying and construction management undergraduate sudents' attitudes to construction law be changed by changes in teaching?, Unpublished PhD Thesis, , University of Sheffield.
Eccles, S D (2000) Quantitative evaluation of contract strategies for construction, Unpublished PhD Thesis, Department of Civil and Structural Engineering, University of Sheffield.
Fletcher, S L (2001) Developing disassembly strategies for buildings to reduce the lifetime environmental impacts by applying a systems approach, Unpublished PhD Thesis, School of Architecture, University of Sheffield.
Gillott, C (2022) Potential for the vertical extension of existing buildings, Unpublished PhD Thesis, , University of Sheffield.
Gyoh, L E (1999) Design-management and planning for photovoltaic cladding systems within the UK construction industry: An optimal and systematic approach to procurement and installation of building integrated photovoltaics: An agenda for the 21st century, Unpublished PhD Thesis, , University of Sheffield.
Hamed, O (2022) Developing a BIM-based tool to automate green buildings assessment: the case of Jordan Green Building Guide, Unpublished PhD Thesis, , University of Sheffield.
Hughes, A J (2022) On risk-based decision-making for structural health monitoring, Unpublished PhD Thesis, , University of Sheffield.
Ibarra, G (2016) The meaning of 'social' in Mexican social housing: A study of housing developments in Mazatlán, Mexico, Unpublished PhD Thesis, , University of Sheffield.
Jiang, H (2019) An institutional analysis of the green housing transition in China: examining developers' capacity to deliver green housing in the Chinese housing market, Unpublished PhD Thesis, Department of Urban Studies and Planning, University of Sheffield.
Li, S (2018) Knowledge domains and skills that facilitate knowledge sharing in project management: a case study in the Chinese construction industry, Unpublished PhD Thesis, Information School, University of Sheffield.
Morland, K V (2020) Multi-level learning of a quality management routine: a UK housebuilder case study, Unpublished PhD Thesis, Management School, University of Sheffield.
Nguyen, B K (2012) Developing a framework for assessing sustainability of tall-building projects, Unpublished PhD Thesis, , University of Sheffield.
Palit, N (2017) Analysis of the project supply chains: coordination and fair allocation, Unpublished PhD Thesis, Management School, University of Sheffield.
Pirooz Far Poorang, A E (2008) Mass-constomisation: The application on design, fabrication and implementation (DFI) processes of building envelopes, Unpublished PhD Thesis, , University of Sheffield.
Price, D A (2003) Community involvement in the design of social housing, Unpublished PhD Thesis, Department of Town and Regional Planning, University of Sheffield.
Sami Kashkooli, A M (2013) A critical building lifecycle assessment framework for building designers and decision makers, Unpublished PhD Thesis, School of Architecture, University of Sheffield.
Sanusi, I E (2019) Optimal and adaptive control frameworks using reinforcement learning for time-varying dynamical systems, Unpublished PhD Thesis, Department of Automatic Control and Systems Engineering, University of Sheffield.